Our Filtered ezH2O bottle filling stations put cleaner healthier water within everyone’s reach.
Quick fill >> 3 times faster than standard fountain
Green ticker >> Tracks bottles saved
Hands-free>> Sensor activated
Elkay’s ezH2O® bottle fillers provide a rapid fill of water to quench thirst and minimize plastic bottle waste in the environment.
Touchless, sensor activated filling system with automatic 20-second shut-off timer.
VISUAL FILTER MONITOR
Green, yellow and red LEDs indicate filter status and when replacement is necessary.
Complete cooler and bottle filling station in a consolidated space saving ADA compliant design.
3000 GALLON FILTRATION
Optional WaterSentry® Plus™ filter certified to NSF 42 and 53 for lead, particulate, chlorine, taste and odor reduction.
Informs users of number of 20oz. plastic water bottles saved from waste.
Filter recognition system detects a new filter and automatically resets the filter monitor light.
Turns off at your programmed time to lower energy use and bills.
Our certified filters put cleaner, healthier water within everyone’s reach, keeping kids and drinking water safe.
Now one hookup, not two or three. Everything arrives in one box, not multiple.
Display can be personalized and our Green Ticker™ shows the number of bottles saved from waste.
An energy-efficient touch that helps users see when the bottle is full.
How long do the filters last?
Our filters are rated for 3,000 gallons, which is about 24,000 16-ounce bottles. Actual filter life will depend on your water conditions. We also recommend changing the filter at least once a year.
Is it a generic filter or do I have to buy it from Elkay?
Our filters are designed and manufactured to work within Elkay units and provide optimum performance. You can buy the filter through Ecofil, Ireland's only authorized Elkay distributor.
What does the filter remove from the water?
The Elkay® WaterSentry® Plus EWF3000 filter used in the ezH2O® bottle filling stations reduces aesthetic chlorine, taste and odor, particulate class I, and lead. The filter has a rated capacity of 3,000 gallons.
How easy is it to change the filter?
Replacing the filter is simple. Just a 1/4 turn to remove the used filter and replace with the new one - you don't even need to shut off the water. Replacement filters are available in singles and multi-packs. To order replacements, contact us directly.
How do I reset the visual filter monitor light?
There’s no need to -- Enhanced bottle filling stations recognize when a filter has been replaced and automatically reset the filter monitor light from red to green.
What does the yellow light mean on the bottle filling station? Is the water still safe to drink?
The LED lights on the bottle filling station indicate the status of the filter. Green indicates the filter needs no attention. Yellow is to alert the maintenance or repair group that a new filter will be needed shortly. The unit is still safe to drink from; water is still being filtered. Red indicates that the filter has reached 100% of its usable life and should be replaced promptly.
What type of maintenance and cleaning is required?
Maintenance on the bottle filling stations is very simple and should be included as part of the building’s general cleaning schedule. We recommend cleaning the unit regularly with warm soapy water. The stainless basin, plastic alcove and top unit should be wiped down with a general mild detergent and soft cloth, rinsed and towel dried. If needed, a mild vinegar and water solution may help remove hard water stains. For stubborn stains on the stainless steel areas, a non-scratch Scotch-Brite™ cleaning pad may be used. Always remember to follow the direction of the grain. Avoid using steel soap pads as particles can adhere to the stainless steel and eventually cause rust. Light scratches are normal for stainless steel basins; over time they will blend into the uniform finish pattern.
How can I tell if people are using the bottle filling stations?
Each bottle filling station can tell you how much water is being consumed from the unit itself. We have a Green Ticker™ on our units, which counts every 20 fluid ounces of water dispensed, and eliminating waste from disposable plastic bottles. That number shows you how much the bottle filling stations are being used.
How easy is it to change the filter?
Replacing the filter is simple. Just a 1/4 turn to remove the used filter and replacewith the new one – you don’t even need to shut off the water. Replacement filters are available in singles and multi-packs. To order replacements, contact us at 800-834-4816.
I’m getting an error message scrolling across my counter area (aka Green Ticker™). How do I know what it means?
In your user manual, there is a table that explains each error code and what is the cause of that error code, what are the areas to look at for repair. You can find a copy of your user manual by searching your specific SKU on our website; Simply type the SKU into the search box in the upper right corner. When the page appears, click on the Downloads tab to find your user manual.
Where is the data tag located on the bottle filling station?
The serial data tag is now located on the bottom of the cooler. Previously, there was a separate tag for the bottle filler and an additional one on the cooler. We have consolidated it into one tag on the underside of the cooler basin.
The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.